Extron electronics TLP Pro 1220MG, Руководство пользователя

Страница: 27 / 40

1. Select the video input by pressing the appropriate button (
HDMI
or
XTP
).
The EDID information is shown in a read-only panel.
2.
To adjust
Brightness
,
Contrast
,
Detail
, or
Overscan
, press the appropriate button. A
small window opens to the right of the screen. For
Brightness
,
Contrast
, and
Detail
,
the window shows the current value with right and left arrows to increment or decrement the
value. To change the value more quickly, use the slider underneath.
To reset the value to default, press the default value. The default value for
Brightness
,
Contrast , and Detail is 64 . All three parameters can be adjusted to any value between 1
and 127 .
3.
Press Overscan . A small window opens offering the options 0% , 2.5% , and 5% . The default
setting is 5% .
4. Press
Exit
to save the changes and return to the
Input
screen.
Advanced Screen
Status Display Audio Input Advanced Exit Network
Menu Pin Communication LED
System GUI Project
Touchpanel Name:
Controller Name:
TLPPro1220_ABCDEF
IPCPPro350_FEDCBA
Controller IP: 192.168.254.250
------------------------------
Global Configurator Project
Name:
Version:
Creation Date:
Revision Date:
N_Campus.gcpro
0.0.22.0
6/22/2015 2:15:26 PM
6/25/2015 1:47:18 PM
Name:
Resolution:
Creation Date:
Revision Date:
N_Campus.gdl
1280x800
6/26/2015 11:31:55 AM
6/27/2015 12:06:31 PM
Version: 0.0.9
Project Size:
Storage Size:
Project Usage:
3 MB
196 MB
2%
On Off Change Enable Disable
Figure 15. Advanced Screen
The System and GUI Project panels are read only, providing information about the system.
Menu PIN
Press
Change
to open the
PIN Setup
window. The PIN setup options allow you to enable,
disable, or change the setup menu PIN. The PIN is a 4-digit number. Each digit can have any
value from
0
-
9
.
1.
Press a number on the keypad. A blue circle appears in the first box.
Enter New Menu PIN
4 5 6
7
8
9
0
2 1 3
Cancel
Back
Figure 16.
Numeric Keypad for Setting PIN
2.
Select the other three digits for the PINs. The fourth circle appears momentarily and then the
screen changes to
Confirm New Menu Pin
.
3. Enter the PIN a second time. When the PIN entered on the second occasion matches the
PIN entered on the first occasion, the PIN is set and the dialog closes.
Communication LED
The LED (see figure 2 ,
A
on page 6) can be enabled or disabled.
TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series • Setup Menu 19