Extron electronics TLP Pro 1025 Series Скачать руководство пользователя страница 14

Страница: 14 / 48

Installation
Overview

This section provides an overview of the installation process. Follow the links for a more detailed
explanation of each step.

Before starting to install the TLP Pro models, download and install the latest versions of the
following software:

GUI Designer

— For designing layouts for Extron TouchLink Pro touchpanels and third

party touch interfaces.

Global Configurator Plus and Professional

— For setting up and configuring the

control processor and touchpanel.

Toolbelt

— Provides device discovery, device information, firmware updates,

and configuration of network settings, system utilities, and user management for
TouchLink Pro devices.

Global Scripter

—

Provides an integrated development environment for Extron control

systems programming.

See

Configuration Software

on page 21.

NOTE:

The TLS models do not need to be configured or programmed. Other than

setting network addresses (see

Setup Menu

on page 14), they are ready to use,

as shipped.

Before starting to install the TLP Pro models, obtain the following network information from
your network administrator:

Dynamic Host Configuration Protocol (DHCP) status

(on or off). If DHCP is off, you

also require:

IP address

Subnet mask

Gateway

User name

— This can be either

admin

user

Password

— The factory configured passwords for all accounts on this device have

been set to the device serial number. Passwords can be changed during configuration.
Passwords are case sensitive.

NOTE:

If the device is reset to default settings, the password is the default

password configuration. The default password is

extron

(for either

admin

user

accounts).

MAC address

— Make a note of the touchpanel MAC address, which can be found

on the rear panel label (TLP Pro 525M, 725M, or 1025M) or a label on the base
(TLP Pro 525T, 725T, or 1025T).

NOTE:

This information is not required for the TLS models.

SSL security certificates and IEEE 802.1X authentication

— Extron touchpanels

come with a factory‑installed Secure Sockets Layer (SSL) security certificate. IEEE
802.1X authentication is also supported once enabled. See

Secure Sockets Layer

(SSL) Certificates

on page 35 or see

IEEE 802.1X Certificates

on page 36 for

more information.

TLP Pro 525, 725, and 1025 Series Touchpanels • Installation Overview

Содержание TLP Pro 1025 Series

















































Результаты поиска

Содержание TLP Pro 1025 Series

Отзывы:

Похожие инструкции для TLP Pro 1025 Series

Бренды по названию

Популярные бренды

Extron electronics TLP Pro 1025 Series, Руководство пользователя

Результаты поиска

Содержание TLP Pro 1025 Series

Отзывы:

Похожие инструкции для TLP Pro 1025 Series

Бренды по названию

Популярные бренды