n
Network and Power over Ethernet Connector
— The
TLP 710TV connects to a network using a twisted pair cable,
terminated with an RJ-45 connector. The LAN port is in the
top surface of the recessed area (see the arrow to the right in
figure 9
).
The LAN port has two LEDs. The green LED lights steadily to indicate that the
touchpanel is connected correctly to a network. The yellow LED flashes to indicate
that data is being passed to or from the touchpanel.
An Extron IP Link control interface must also be connected to the same network
domain.
Suggested models
are listed on page 3
.
Use a straight-through Ethernet cable to connect the panel to a switch or router. Use a
crossover cable to connect the panel directly to a computer.
Extron recommends using a Power over Ethernet (PoE) power supply. Use a
straight-through Ethernet cable to connect the power supply to a switch or router.
This cable carries network information from the switch or router to the power supply
input. A second straight-through cable carries the network information and 48 VDC
from the power supply to the TLP 710TV. Connect the IEC power cord to a convenient
100 VAC to 240 VAC, 50-60 Hz power source.
PWR LAN-OUT
LAN-IN
To Network Switch
To TLP 710TV
Power over Ethernet (PoE) Power Supply
Figure 11.
Connecting the Power over Ethernet Power Supply
CAUTION:
See the
Cautions
on page 8 for important information about using a
Power over Ethernet power supply.
NOTE:
The twisted pair cable providing the MTP and network connections should
be secured together and to both the back panel and base using zip-ties.
LAN
Link LED
Activity LED
RJ-45 Port
TLP 710MV and TLP 710TV • Panel Features
12
Содержание TLP 710MV
Страница 6: ...TLP 710MV and TLP 710TV Contents vi ...