Extron electronics StudioStation 100, Руководство пользователя

Страница: 57 / 131

StudioStation 100 • Web-Based User Interface 50
2
Picture Controls — Alter the quality of the image by changing brightness and contrast,
or select
Auto-Image
,
Auto-Image & Fill
, and
Auto-Image & Follow
(see figure 37
on page 49).
3
Overscan — Set the amount (0, 2.5%, or 5%) of picture enlargement applied to the
HDMI video signal for any SMPTE standard input.
4
Input Presets — Save up to 128 presets or recall one of those presets, each with a
combination of signal type, signal sampling, picture controls, and audio gain settings.
See the
StudioStation 100 Help File
for additional information.
Encoder Settings and Metadata
The controls within the
Encoding & Metadata
page configure signal streaming and
encoding and also permit selection or configuration of metadata and recording profiles. A
user must be logged in as an administrator to see or change these settings.
To open this page, click the
Configuration
tab at the top of the embedded web pages
and then click the
Encoding & Metadata
tab on the second tier of tabs.
Figure 38. Configuration Tab, Encoding & Metadata Subtab
The
Encoding & Metadata
page opens. It features two expandable panels:
•
Encoding Presets
– Configure audio encoding, video encoding, recording and
streaming parameters, then create and save or recall presets of those settings.
•
Metadata and Recording Profiles
– Change the OSD font, enter metadata
elements, and create and save Recording Profiles.
See the
StudioStation 100 Help File
for additional information.
Some of the encoder settings can also be set using SIS commands (see the Command
and Response Tables on page 78).
Encoding Presets
Encoding presets and Streaming presets are combinations of settings for audio and video
encoding. The recording uses the highest quality signal encoding (recording encoding)
and the preview (streaming encoding) displayed within the embedded web pages uses the
lowest quality encoding (streaming encoding) of the encoding streams.
The StudioStation 100 supports up to two encodes (recording, streaming), one recording,
one local output, and live streams simultaneously.
Any of the default encoder presets or user-created presets can be recalled and applied to a
recording session (recording encoder) and stream using the embedded Web pages. Presets
can also be recalled using SIS Commands (see the
Command and Response Tables ).
NOTE:
Encoding Presets
and
Streaming Presets
must be selected prior to the start
of a recording. You cannot change encoding or streaming settings during an active
recording.
The first eight Encoder Presets are populated with factory configurations which can be
overwritten. Presets 9 through 16 are unassigned and unconfigured. The 16 Streaming
Presets are unassigned and unconfigured. All
Encoder Presets
and
Streaming Presets
can be configured on the
Encoding & Metadata
page.
figure 38