Extron electronics NAV SD 511, Руководство пользователя

Страница: 34 / 90

NAV SD 511 Scaling Decoder • HTML Operation 26
3
Color Bit Depth (see figure 16 on page 24) — Click the
drop-down list to select between the following two output
formats for the HDMI Output port (see
B
on page 7).
• Auto — Adjusts color bit depth based on the display EDID
(10 bit or 8 bit) ( default ).
• Force 8 - Bit — Always uses 8 bit output.
4
HDCP Notification — Click to toggle HDCP Notification on and off. This selection
lets you select what is displayed on the HDMI output when the input signal contains
HDCP-protected content and the output is a non-HDCP sink.
When
HDCP Notification is checked, a green screen is generated to clearly indicate
an HDCP issue has been encountered. When HDCP Notification is unchecked, a
black screen is generated to discretely show there is an HDCP issue.
This feature has no effect on the functionality of HDCP. Extron recommends leaving
HDCP Notification enabled to easily know when a HDCP issue has occurred.
Audio pane
See figure 17. If you change any of the settings in the
Audio
dialog box (
1
and
2
), the
SAVE
button (
3
) becomes selectable. Click SAVE to take changes or CANCEL (
4
) to
abandon them. Clicking either button closes the dialog box.
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Figure 17. Audio Dialog Box
1
Audio Volume — Set the
Audio
Volume in one of three ways:
• Click and drag the fader control.
• Click the and buttons.
• Directly type a rate into the field.
2
Allow Audio Only — Click to toggle Audio Only on and off.
NOTES:
•
Audio Only
sends a black video signal and sync to the attached display to
prevent it from going into a standby state. This allows audio to continue to be
played using the internal speakers of the display when there is no video.
• Allow Audio Only must be disabled to use the NAV screen saver (see On
Screen Display (OSD) pane on page 30).