Extron electronics NAV SD 511, Руководство пользователя

Страница: 52 / 90

NAV SD 511 Scaling Decoder • HTML Operation 44
2. Select (click) a reset level (see figure 38 ,
2
on page 43) or Reboot (
3
).
NOTES :
• Reset Device Settings (Retains TCP/IP Settings and Password)
—
Resets configuration settings. All communication settings and the password
are retained. See the
table
of communication and configuration settings on
page 41.
• Reset All Settings and Delete Files (Retains TCP/IP Settings) —
Resets configuration settings except the communication settings, which are
maintained. Resets the password to the default, which is
extron
. See the
table of communication and configuration settings.
• Reset All Settings and Delete Files — This reset is identical to the Mode 5
reset (see the table of rear panel reset modes on page 16).
3. Click APPLY (
4
).
The decoder reports that it is
Resetting
and
Rebooting
and displays a status bar that shows the progress of the
operation. Any of these operations concludes with the
decoder rebooting.
NOTE: You must reconnect to the decoder (see
Opening the Embedded HTML Pages on page 18)
if you have additional operations to perform.