
NAV SD 511 Scaling Decoder • Installation
7
NOTES
:
•
Ensure that you use the proper fiber cable for the NAV 1G port. Typically,
singlemode fiber has a yellow jacket and multimode cable has an orange or
aqua jacket.
•
The LEDs for the fiber port indicates as follows:
•
Act (amber) LED
— Transmission of data packets on the fiber connector.
This LED blinks as the decoder communicates.
•
Link (green) LED
— The decoder is properly connected to a LAN. This
LED lights steadily.
on page 6) — Connect an HDMI cable
HDMI
between this port and an HDMI display (see
page 9 to use the LockIt HDMI Cable Lacing Bracket to secure the
connector to the decoder).
— This 5-pole, 3.5 mm captive screw connector
L
R
AUDIO
outputs the streamed, unamplified, line level analog audio. Connect an
audio device, such as an audio amplifier or powered speakers (see
on page 10 to wire the connector).
— Connect a serial RS-232 signal, a
RS-232
Tx Rx G S G
IR
modulated IR signal, or both to this 3.5 mm, 5-pole captive screw
connector for bidirectional RS-232 and IR communication (see
on page 10
to wire the connector).
— Connect a USB Type-C
®
cable from a USB host or a USB
5V/500 mA
USB 2.0
to securely fasten the USB connector to
This connector is limited to supplying 500 mA in USB device mode.
— If desired, connect another networked device to this
EXT
port. The port acts as a networked switch to the NAV 1G port (
A
).
•
on page 7 to properly wire the RJ-45
connector. The Extension port cannot provide PoE.
•
The LEDs for the RJ-45 port indicate as follows:
•
Act (amber) LED
— Indicates transmission of data packets
on the RJ-45 connector. This LED blinks as the decoder
communicates.
•
Link (green) LED
— Indicates that the decoder is properly
connected to an Ethernet LAN. This LED lights steadily.
— The Reset button initiates three levels of decoder
RESET
reset. For the different reset levels, press and hold the button while the decoder
is running or while you power up the decoder (see
page 16 for details).
Содержание NAV SD 511
Страница 1: ...User Guide NAV Pro AV Over IP 68 3606 01 Rev A 08 22 NAV SD 511 Streaming HDMI Scaling Decoder...
Страница 6: ......
Страница 8: ...NAV SD 511 Scaling Decoder Contents viii...