manualshive.com logo in svg

Extron electronics MLS 608 D SA, Руководство пользователя

Поделиться
Скачать
Extron electronics MLS 608 D SA Скачать руководство пользователя страница 9

 

z

Essential audio DSP tools 

— ProDSP provides an extensive array of easy-to-use, 

digital audio processing tools for audio system setup and fine-tuning, including audio 
gain, dynamics, compression, filtering, delay, microphone ducking, loudness, and 
feedback suppression. 

 

z

DSP Configurator

™

 Software 

— A powerful yet user-friendly software tool for 

managing all audio setup and operations of the MLS 608 D SA, it enables complete 
setup and configuration of digital audio processing tools on the ProDSP platform as 
well as microphone mixing. 

 

z

Front panel USB configuration port 

—

 

Provides convenient access for system setup 

and configuration, as well as ProDSP for audio system integration. 

 

z

Plenum rated MTP/HDMI U R receiver

 — meets UL 2043 for heat and smoke 

release, excluding power supply 

 

z

Rack-mountable

 2U, full rack width metal enclosure 

 

z

Internal universal power supply 

— The 100-240 VAC, 50-60 Hz, international 

power supply provides worldwide power compatibility.

Controlling the MLS 608 D Series Switcher

All MLS 608 D series switchers can be controlled using one or more of the following 
methods:

 

z

The front panel controls.

 

z

A computer, a TouchLink touchscreen panel, or MediaLink Controller connected to the 
RS-232 port. These allow creation of a simple and intuitive user interface for the 
MLS 608 D Switchers, and the entire room. 

 

z

The Extron Simple Instruction Set (SIS

™

): a set of simple keystroke commands that can 

be used to control the devices via a computer or similar control device connected to 
the RS-232 port

 

z

DSP Configurator control software, running from a connected computer, and used for 
managing all audio setup and operations of the MLS 608 D Series unit. This enables 
complete setup and configuration of digital audio processing tools on the ProDSP 
platform as well as microphone mixing.

 

MLS 608 D Series • Introduction

3

Содержание MLS 608 D SA





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды