Extron electronics MLS 608 D SA, Руководство пользователя

Страница: 80 / 100

Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional
Description
EDID Management
Assign EDID data to
inputs (analog and
digital inputs)
E
A
X2@
*
X2!
EDID
}
EdidA
X2@
*
X2!] Assign EDID data X2!
to inputs VGA or HDMI
X2@
View EDID data
assigned
E
A
X2@
EDID
} X2!] View EDID data
assignment.
Save an output
EDID to (analog)
user loaded space
E
S
X2#
*
X2$
EDID
}
EdidS
X2#
*
X2$] Save display EDID to
analog user space.
Save an output
EDID to (digital)user
loaded space
E
S
X2#
*
X2%
EDID
}
EdidS
X2#
*
X2%] Save display EDID to
digital user space.
View/read EDID in
hex format
E
R
X2@
EDID
} X2&] View EDID data in hex
format for X2@ .
View EDID native
resolution
E
N
X2@
*
X2^
EDID
} X2*] View native resolution
and refresh rate.
HDCP Management
View input HDCP
status
E I X2( HDCP } X3!] Signal present, HDCP,
non HDCP, or HDCP
status unknown.
View output HDCP E OHDCP } X3@] Output connected,
HDCP, non HDCP, or
HDCP status unknown.
View HDCP status
for all HDMI inputs E I*HDCP } X3!
5
* X3!
6
* X3!
7
* X3!
8
] HDCP, non HDCP, or
HDCP status unknown
(for all HDMI inputs).
Set HDCP
notification
E N X3# HDCP } HdcpN X3#] Show green or black
screen.
View HDCP
notification setting
E NHDCP } X3#]
NOTE:
X2! = DDC value (EDID). See EDID table on page 66 for details .
X2@ = Video group: 1 = VGA, 2 = HDMI
X2# = Output selection: 1 = analog buffered VGA connector on MLS 608 D, 2 = digital HDMI connector on
MTP/HDMI U R
X2$ = Analog EDID user definable locations: 49 = user 1, 50 = user 2
X2% = Digital EDID user definable locations: 51 = user 3, 52 = user 4
X2^ = EDID, 0 = current assigned EDID: 1 = user loaded 49 when X2@ = 1, user loaded 51 when X2@ = 2;
2 = user loaded 50 when X2@ = 1, user loaded 52 when X2@ = 2
X2& = 128 or 256 byte EDID raw hex (text form)
X2* = Native resolution and refresh rate, for example 1280x720@60
X2( = Inputs 5 through 8 only (for HDCP commands)
X3! = Input HDCP status: 0 = source is connected but not HDCP compliant, 1 = source is connected and is HDCP
compliant, 2 = no source connected, 3 = HDCP status not known
X3@ = Output HDCP status: 0 = output is connected, current input source encrypted, output is not HDCP compliant,
1 = output is connected, current input source encrypted, output is HDCP compliant, 2 = no output connected,
3 = output is connected, current input source is not encrypted or not connected, output HDCP status not known
X3# = HDCP notification = green screen notification on the output when a display is non-HDCP compliant: 0 = black,
1 = green (default)
MLS 608 D Series • SIS Programming and Control 74