manualshive.com logo in svg

Extron electronics MLS 608 D SA, Руководство пользователя

Поделиться
Скачать
Extron electronics MLS 608 D SA Скачать руководство пользователя страница 58

Tools menu

Click on this menu to open a drop-down list: 

Presets, 

Protected Configuration, Configure EDID, 
Connect to Device, Issue RESET Command, 
Save Changes to Device, Firmware Loader, 
Organize Building Blocks, Configure Groups, 
Device Settings,

 and 

Options

.

NOTE:

 

Connect to Device

 menu changes to 

Disconnect from Device

 when a device is 

connected.

 

z

Presets 

— Selecting this option brings up four submenus:  

Mark All Ties, Mark All Items, Save Presets,

 

and 

Clear Marked Items

.

Up to 8 presets can be saved in either Live or Emulate mode,

 

and then uploaded to a connected device or after recall, 
downloaded for saving to disk. 

All Ties

 and 

All Items

 be selected for saving as 

a full preset, and are visibly highlighted green on the screen. Any marked items can 
also be cleared, removing them from the current preset to save option.

NOTE:

  Presets that are saved via DSP Configurator are partial presets, which can 

include any or all the gain, processor, switcher, and mic-mixer settings.

For full details on how to save, preview, and recall presets see the 

DSP Configurator 

Help File.

 

z

Protected Configuration 

— Selecting this option when in Live mode brings up 

three submenus: 

Save, Restore,

 and 

Change PIN

. A protected configuration 

is a password (PIN)-protected configuration containing all elements (includes all level 
settings, DSP processing, ties, and video controls). These submenus allow the user to 
save the current configuration as a protected configuration, restore a previously saved 
protected configuration (this overwrites all current audio and video settings), and 
change the 4-digit PIN. The submenus are only available in Live mode.

Figure 39. 

The Protected Configuration Submenu within the Tools Menu

 

MLS 608 D Series • DSP Configurator

52

Содержание MLS 608 D SA





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды