Extron electronics MLS 608 D SA, Руководство пользователя

Страница: 82 / 100

Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional
Description
Reset (Zap)/Erase Commands
Reset all video and
audio settings to
factory default
E
ZXXX
}
Zpx
] Resets all video and audio
settings.
Reset all settings to
factory default
E
ZQQQ
}
Zpq
]
Resets all video and
audio settings, protected,
configuration, verbose mode,
and control port settings.
NOTE:
This command is the same as reset mode 5. See the Mode 5 details in the "Operations" section.
Delete all presets and
names E ZG } Zpg ] Removes all presets and preset
names.
Delete individual
preset
EX1@
ZG
}
Zpg
X1@] Removes a selected preset.
Bidirectional Serial Port Commands
Configure
parameters
24
E 1* X4$ , X4% , X4^ , X4& CP } Cpn01 X4$ , X4% , X4^ , X4&] Set baud rate X4$ , parity
X4% , data bits X4^ , and
stop bits X4& .
View parameters E 1CP } X4$ , X4% , X4^ , X4&] View baud rate X4$ ,
parity
X4%
, data bits
X4^
,
and stop bits X4& .
Verbose settings
Set verbose mode EX4* CV } Vrb X4*] Set verbose mode
parameters.
View parameters E CV } X4*] View verbose mode
parameters.
Unit name
Set unit name EX5@ CN } Ipn • X5@] Set unit name.
Set unit name to
default E •
CN
}
Ipn
• X5#] Set unit name to default
View unit name E
CN
} X5@] View unit name
NOTE:
X1@ = Preset number: 1-8
X4$ = Baud rate: 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, 28800, 38400 (default), 57600, 115200
X4% = P arity, O dd, E ven, N one (default), M ark, S pace (only use first letter, for example N = N one)
X4^ = Data bits: 7, 8 (default = 8)
X4& = Stop bits: 1, 2 (default = 1)
X4* = Verbose mode: 0 = no verbose mode and non-tagged responses for queries, 1 = verbose mode and non-tagged
responses for queries (default), 2 = no verbose and tagged responses for queries, 3 = verbose mode and tagged
responses for queries
X5@ = Alpha numeric up to 24 characters. No special characters except hyphen (-). No lower or upper case distinction,
no blanks or spaces. First character must be alpha, last cannot be hyphen.
X5# = Alpha numeric name. Combination of unit name and last three pairs of unique alpha-numeric characters,
(for example MLS-608-D-MA-06-DE-2E).
MLS 608 D Series • SIS Programming and Control 76