manualshive.com logo in svg

Extron electronics IPCP 505, Руководство пользователя

Поделиться
Скачать
Extron electronics IPCP 505 Скачать руководство пользователя страница 89

IPCP 505 • Firmware Updates

81

Firmware Updates

If the need arises, you can replace the IPCP main firmware without opening the unit or 
changing firmware chips. This section covers the following aspects of how to do that:

• 

Determining the Firmware Version

• 

Updating the Main Firmware

Determining the Firmware Version

There are several ways to check which version of firmware the controller is using:

• 

The 

IP Link Settings

 tab within Global Configurator (GC) software

• 

The 

System Status

 or the 

System Settings

 page of the IPCP embedded web 

pages

• 

The GlobalViewer web pages

• 

The response from the controller to an SIS command of 

1Q

 (see page 67) or 

0Q

 (see 

page 67)

Using the Global Configurator Software

1. 

Via Ethernet, connect a PC (on which the Global Configurator program has been 
installed) to the IPCP.

2. 

Start the Global Configurator (GC) program and open a project (see the 

Global Global 

Configurator Help File

 and see 

Software-based Configuration and Control

 starting 

on page 20 for details).

3. 

In the window on the left side of the GC screen, click on the name of the IPCP for which 
you want to check the firmware version.

4. 

In the right side of the GC screen, click the 

IP Link Settings

 tab.

5. 

Click the 

Refresh

 button. The firmware version is listed in the 

System Description

 

area.

Using a Web Browser

The IPCP controller comes with a set of factory default embedded web pages. Also, if the 
IPCP is used as part of a network of devices based on IP Link technology, such as IP Link 
control processors and MediaLink controllers, the GlobalViewer (GV) application could be 
installed in the IPCP as well as in other IP Link devices within the network. See the 

Global 

Configurator Help File

 for information on how to use that software and the resulting web 

pages. Either type of web page (factory default or GV) can be used to find the part number.

1. 

Connect the controller to a PC via an Ethernet connection, or connect the controller 
and the PC to a network/LAN. For details see 

Hardware Features and Installation

 

starting on page 8, 

Software-based Configuration and Control

 starting on 

page 20, and the 

IPCP 505 Setup Guide

.

2. 

Start a web browser program.

Содержание IPCP 505


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды