manualshive.com logo in svg

Extron electronics IPCP 505, Руководство пользователя

Поделиться
Скачать
Extron electronics IPCP 505 Скачать руководство пользователя страница 60

IPCP 505 • Software-based Configuration and Control

52

Troubleshooting

Turn on the input devices (DVD players, VCRs, Blu-ray players, PCs, and other sources), 
output devices (display screens, projectors), the IPCP 505, and the PC and touchpanel. 
Touch a configured button on the touchpanel or (via PC) click a control button on the IPCP 
embedded Control web pages.
If an input or output AV device cannot be remotely controlled (does not respond as 
expected), check the following items.

Power Connections

• 

Ensure that all devices are plugged in.

• 

Make sure that each device is receiving power. The IPCP front panel Power LED lights if 
the device is receiving power.

Data Connections

1. 

Check the cabling connections and make adjustments as needed. The Link LEDs on the 
IPCP and on the touchpanel or PC should be steadily lit green if a network connection is 
detected. If these LEDs are not lit, either the cable is faulty or not plugged in, or the wrong 
type of cable is being used (see 

LAN (IP) connector and LEDs

 on page 14).

2. 

Try to “ping” the unit by entering 

ping 192.168.254.254

 at the command prompt, or 

use the IP or web address provided to you by your system administrator. If you get no 
response:

• 

Make sure your unit is using the appropriate subnet mask (check with your system 
administrator).

• 

Make sure your PC and network do not have a software firewall program that might 
block the IP address of the IPCP unit.

3. 

If contact is established with the unit, but the IPCP web pages cannot be accessed 
by your browser, verify (via an Internet network options or preferences menu) that your 
browser is configured for direct network connection and is not set up to use a proxy 
server.

Device Control Connections and Configuration

• 

Verify that ports are wired correctly and that ground (earthing) wires are connected to 
the proper pins on the IPCP and, if applicable, on the controlled device.

• 

Ensure that each IR emitter head is placed adjacent to or directly over the IR pickup 
window on the controlled device.

• 

Verify that the appropriate drivers were used while creating the GC configuration file 
and that the correct commands and signal types (IR or RS-232) are associated with the 
correct ports on the IPCP and on the other devices.

If you still experience problems, call the 

Extron Sales & Technical Support Hotline

 or the 

Extron S3 Control Systems Support Hotline (1.800.633.9877).

Rev. C: Replaced 

hyperlink with 
phone number.

Содержание IPCP 505


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды