HAI 100 4K PLUS • SIS Commands
10
ASCII to Hex Conversion Table
•
Space
Symbol definitions
•
= Space
]
= Carriage return with line feed
}
= Carriage return with no line feed (used interchangeably with the pipe character, |)
|
= Pipe (vertical bar) character (used interchangeably with the carriage return with
no line feed character,
}
)
E
= Escape key (used interchangeably with the <
W
> key)
X!
= Embedded input audio format:
0
= auto (pass existing HDMI audio if it exists, otherwise embed analog)
1 = Pass existing digital/embedded audio
2 = Embed analog audio (default)
3 = embed S/PDIF input
X@
= Video mute:
0
= off (default)
1 = video only
2 = video + sync
X#
=
0
= off, disabled or not detected
1 = on, enabled, or detected
X$
= Output HDCP mode (default = 0):
0
= Encrypt as required by input.
Continuous trials for HDMI sinks
Attempt for 10 seconds on DVI sinks and then fail
1 = Always encrypt
Continuous trials for HDMI sinks
Attempt for 10 seconds on DVI sinks and then fail
2 = Encrypt as required by input. Continuous trials for HDMI and DVI sink
3 = Always encrypt. Continuous trials for HDMI and DVI sinks.
X%
= TMDS output format:
0
= Auto (default)
1 = DVI RGB 4:4:4 Full
2 = HDMI RGB 4:4:4 Full
3 = HDMI RGB 4:4:4 Limited
4 = HDMI YUV 4:4:4 Limited
5 = HDMI YUV 4:2:2 Limited
X&
= EDID data as 128 or 256 bytes of HEX data (text representation)
X*
= Native resolution and refresh rate from currently assigned EDID
For example: 1920x1080 @ 60 Hz
