background image

Control

The Control tab provides online access to DVS 304 unique features such as remote control 
of the front panel, memory and input presets, and picture-in-picture (PIP) setup.

User Control page

The User Control page simulates elements of the DVS 304 front panel, but also includes 
other features such as picture control, mute and freeze options, auto image, film mode, 
aspect ratio, and front panel lockout (executive mode).

Figure 46. 

User Control Page

The aspects of each input (1-4) can be controlled independently. Click on the appropriate 
input number to immediately change its on-screen attributes.

Video/audio breakaway (Audio models only)

Use the check boxes shown below to select whether video, audio, or both are switched 
to the new selected input. When only one box is checked and the other is cleared (that is, 
different audio and video sources are selected), this is a breakaway.

 

You can also define the volume level, mute audio, and set the level of gain and 
attenuation for each input (-15 dB to +9 dB), as shown below.

                             

 

DVS 304 Series • Ethernet Control

73

Содержание DVS 304





























































































Отзывы: