Extron electronics DVS 304, Руководство пользователя

Страница: 43 / 92

Command ASCII Command
(host to scaler)
Response
(scaler to host)
Additional Description
Active pixels
Specify a value
12*
X7*
# Apx
X7*
]
Adjust the active pixels to specified value.
Increment value +12#
Apx
X7*
]
Increase the active pixels.
Decrement value - 12#
Apx
X7*
]
Decrease the active pixels.
View 12#
X7*
]
Show the active pixels.
Active lines
Specify a value
13*
X7(
#
Aln
X7(
]
Adjust the active lines to specified value.
Increment value +13#
Aln
X7(
]
Increase the active lines.
Decrement value - 13#
Aln
X7(
]
Decrease the active lines.
View 13#
X7(
]
Show the active lines.
Film mode (PAL 2:2 pulldown detection)
Enable 18 * 1# Flm 1 ] Enable Film mode (auto sense for 3:2 or
2:2 pull down)
Disable 18 * 0# Flm 0 ] Disables Film mode (locks de-interlacer to 2:2 pull
down).
View 18#
X%
]
View the currently displayed film mode setting.
Input aspect ratio
16:9 9 * 1# Asp 1 ] Set input aspect ratio to 16:9.
4:3 9 * 0# Asp 0 ] Set input aspect ratio to 4:3.
View 9#
X8)
]
View the input aspect ratio (1 = 16:9, 0 = 4:3).
Video mute
Enable mute 1B Vmt1 ] Blank selected input.
Disable mute 0B Vmt0 ] Display selected input.
View B
X%
]
View the mute status (0 = disabled, 1 = enabled).
EDID emulation (for input 4 — DVI models only)
Save display EDID
to user space E
S
X10*
EDID } EdidS
X10*
]
Save display EDID to user space. Only applies where
X10*
= 2 to 4
Assign EDID to
input 4
E
A*
X10*
*4EDID }
EdidA
X10* *
4 ]
Assign EDID to input 4.
View EDID data
E
A*4EDID }
X10*
]
EdidA
X10* *
4 ]
View EDID data assignment (input 4).
Verbose mode
response
Export EDID data E
E*
X10*
EDID }
X6)
]
EdidE
X10* * X6)
]
Export EDID file data.
Verbose mode response
Import EDID data
E
I*
X10*
EDID }
X6)
Edid I*
X10*
]
Import EDID file data to user
Only applies where
X10*
= 2 to 4.
NOTE:
X% = On or off 0 = off/disable, 1 = on/enable
X6) = EDID file data block 128 bytes of binary data
X7* = Active pixels +/- 100 of the default value for video and +/- 512 for RGB
X7( = Active lines +/- 256 for RGB, +/- 127 for video
X8) = 0 or 1 0 = 4:3, 1 = 16:9
X10* = EDID resolution and refresh rate 10 to 78 ( see table on page 36 )
DVS 304 Series • SIS Communication and Control 38