Extron electronics DVC RGB-HD A, Руководство пользователя

Страница: 36 / 41

DVC RGB-HD A • Remote Configuration and Control 29
9. If this is the only device to which you are uploading firmware, click
Add
in the
Add
Device
dialog box (see figure 19 ,
3
, on the previous page).
The DVC information is added to the
Device
panel of the
Firmware Loader
window
(see figure 20,
1
) and the
Add Device
window closes.
Figure 20. Firmware Loader Screen with a DVC RGB-HD A Added
If you will be uploading the firmware to multiple devices that are connected to
your computer, do the following:
a. Click the
Add Next
button in the
Add Device
dialog box. Your first device is added
to the
Device
panel (see figure 20,
2
) of the
Firmware Loader
window, and the
Add Device
window remains open.
b. For each additional device that you want to add to the
Firmware Loader
window,
repeat steps 5 through 8, then click
Add Next
.
c. For the last device, click
Add
(instead of
Add Next
) to add the device and to close
the
Add Device
window.
10. If you want to remove devices from the
Device
panel, do the following:
a. Click on the names of the devices to be deleted, to highlight them.
b. Click
Edit
>
Remove Selected Device(s)
. The selected devices are removed
from the
Device
panel.
To remove all devices, click
Edit
>
Remove All Devices
.
To add devices after the
Add Device
dialog box has closed, click
Edit
>
Add
Device(s)
to reopen the
Add Device
window. Repeat step 9 as needed.