DVC RGB-HD A • Installation
7
ATTENTION:
•
The length of the exposed (stripped) copper wires is important.
The ideal length is 3/16 inch (5 mm)
. Longer bare wires can short together.
Shorter wires are not as secure in the connectors and could be pulled out.
•
La longueur des câbles exposés est primordiale lorsque l’on entreprend de les
dénuder.
La longueur idéale est de 5 mm (3/16 inches).
S’ils sont un peu
plus longs, les câbles exposés pourraient se toucher et provoquer un court
circuit. S’ils sont un peu plus courts, ils pourraient sortir, même s’ils sont attachés
par les vis captives.
•
Unless otherwise stated, the AC/DC adapters are not suitable for use in air
handling spaces or in wall cavities.
•
Sauf mention contraire, les adaptateurs AC/DC ne sont pas appropriés pour une
utilisation dans les espaces d’aération ou dans les cavités murales.
Securing the HDMI Connector Using the LockIt Cable Lacing Bracket
After connecting an input or output device to
an HDMI connector, secure the connector in
place with the provided LockIt bracket as follows:
1.
Plug the HDMI cable into the panel
connection (
1
).
2.
Loosen the HDMI connection mounting
screw from the panel enough to allow the
LockIt lacing bracket to be placed over it
(
2
).
3.
Place the LockIt lacing bracket onto the
screw and slide it up against the HDMI
connector. Tighten the screw to secure the
bracket (
3
).
4.
Loosely place the included tie wrap around
the HDMI connector and LockIt lacing
bracket (
4
).
5.
While holding the connector securely against
the lacing bracket, tighten the tie wrap, then
remove any excess length.
3
3
3
3
2
2
2
4
4
4
1
1
1
Содержание DVC RGB-HD A
Страница 1: ...User Guide DVC RGB HD A Video Converters RGB HDMI Converter 68 2898 01 Rev D 04 21...
Страница 2: ......
Страница 7: ...DVC RGB HD A Contents vii...
