Cable Cubby Drawer CCD 220 and CCD 320
•
Installation Guide (Continued)
11
Mounting the Cable Cubby Drawer under the Table.
2
2
2
2
Strategically tie wrap the cables
to the cable loops on the drawer.
Ensure there is a sufficient
bend radius for the cables.
3
Move the slide forward and
backward where the cable track
is attached to simulate
drawer movement.
Reposition any cables if there are
issues with the bend radius
or if there is resistance.
NOTE:
Check the drawer movement for any binding, and adjust the mounting bracket position as required.
HDMI
VGA
AUDI
O
USB
US
B CHAR
GER
1
Install the included #8 wood screws
in the pre-drilled pilot holes, leaving
1/8 inch (3 mm) of space between the
screw head and the table.
Hang the CCD 220 (320) on the exposed
screws through the CCD slotted
mounting holes.
2
Adjust the CCD left or right 9/32"
(7.14 mm) on the slotted hole to secure it.
3
T
ighten the screws on one side only.
Open and close the drawer several times
to ensure that the slides have self-adjusted
to a parallel movement and the drawer
moves freely.
Tighten the bracket screws on the other
side.
