Cable Cubby Drawer CCD 220 and CCD 320
•
Installation Guide (Continued)
4
Optional: Reposition Cable Track if Necessary
The drawer’s cable track can be respositioned if space underneath the table is limited.
There are two options to reposition the drawer:
NOTE:
Before mounting the CCD, open and
close the drawer several times to test for
cable bend issues or resistance.
Option 2: Relocate the cable track to the other side of the Cable Cubby Drawer.
Perform the same action as in Option 1 and remove the cable track bridge arm.
1
Remove the three cable
track screws located behind
the cable track mounting U
bracket.
2
Remove the three nuts and
washers holding the cable track
in place.
U bracket
1
1
Option 1: Reposition the rear cable track by removing the fixed-length cable track bridge arm.
1
Remove the seven screws
holding the bridge arm and
cable track together.
2
Remove the bridge arm
from its place to allow the
cable track to be repositioned.
Cable Track
Bridge Arm
