Cable Cubby Drawer CCD 220 and CCD 320
•
Installation Guide (Continued)
6
CCD 220
Mounting Template
Instructions
1. Align the template so that the “Table Edge”
of the template is flushed with the edge of
the mounting surface.
2. Mark the center of the holes and drill
pilot holes 3/32
"
(2.38 mm) diameter,
1/2
"
(12.7 mm) inch deep.
22.01"
(559.1 mm)
1.00"
(25.4 mm)
Table Edge
10.70"
(271.8 mm)
12.21"
(310.1 mm)
0.75"
(19.1 mm)
1.00"
(25.4 mm)
20.64"
(524.3 mm)
1.00"
(25.4 mm)
3.85"
(97.9 mm)
12.35"
(313.8 mm)
Pilot drill 3/32" (2.38 mm) diameter holes,
1/2" (12.7 mm) inch deep
(12 places).
NOTE:
The diagram below is not drawn to scale.
Dimensions and templates are available online at
www.extron.com
.
