manualshive.com logo in svg

Extron electronics 60-1021-01, Руководство пользователя, Страница: 65 / 137

Поделиться
Скачать
Extron electronics 60-1021-01 Скачать руководство пользователя страница 65

SMX System MultiMatrix Switchers • SMX Control Software

SMX Control Software

5-2

The following software programs accompany the SMX switchers:

  •  The Windows

®

-based Extron SMX Control Program, which communicates 

with the switcher via the RS-232/RS-422 port and the Ethernet port, provides 

an easy way to set up ties and sets of ties.

  •  The Extron Button-Label Generator allows you to design and print labels for 

the SMX front panel buttons.

Both programs are compatible with Windows 95/98, Windows NT, Windows ME, 

Windows 2000, and Windows XP.  Updates to these programs can be downloaded 

from the Extron Web site 

(http://www.extron.com

).

Installing and Starting the SMX Control Program

The switcher can be operated via the Windows

®

-based SMX Control Program.  

This program is contained on the Extron Software Products DVD (included with 

the switcher).  Install and run this program on a Windows-based PC connected to 

either of the switcher’s serial ports or the Ethernet port. 

 See 

b

 and 

d

, on pages 2-5

 

and 2-7,

 for connection information.  It cannot be run from the DVD.

Installing the program

1. 

Insert the DVD into the drive.  The DVD self starts.

 

The Extron software DVD window appears.

N

  If the DVD does not self-start, run Launch.exe from the DVD.

2. 

Click the 

Software

 tab.

3. 

Scroll to the SMX Control program and click 

Install

.

 

SMX Control Program

4. 

Follow the on-screen instructions.  The installation program creates a  

C:\Program Files\Extron\SMX folder. 

 

Within this are created 3 icons for:
•  SMX Control pgm
•  SMX Help
•  Uninstall SMX Control pgm

Содержание 60-1021-01










































































































































Отзывы:

Нет отзывов