Extron electronics 60-1021-01, Руководство пользователя

Страница: 33 / 137

3-11
SMX System MultiMatrix Switchers • Operation and Setup
Saving or recalling a Global Preset
1 . Press the Esc button to clear all pending changes (flashes green once).
2 . Saving a global preset — Press and hold the Preset button until it flashes red.
OR Recalling a global preset — Press and release the Preset button (lights red).
All previously saved presets also light red.
Step 3.
Press and release the desired (unlit or lit) input or output
button (here output 5, preset #21). The button flashes
red.
Enter button also blinks ( red ).
ENTER
Step 4.
Press the Enter button to
save or recall preset.
All buttons extinguish.
C O N T R O L
PRESET ESC VIEW
ENTER
Step 2.
To save a global preset –
Press and
hold the Preset
button until it flashes red.
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Buttons for any previously saved presets light red
(here preset #’s 8, 18, and 32).
C O N T R O L
PRESET ESC VIEW
INPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUTS
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
N
To recall a global preset –
Press and
release
the Preset button (lights
red
).
N
To recall a global preset – Press and release a lit Preset button.
Figure 3-13 — Saving or recalling a global preset
3 . Press and release a desired input or output button to select the address to save
the current configuration to. Address, Preset, and Enter buttons flash red .
N
Any lit or unlit button can be selected to save a preset to. Only lit presets can
be recalled. When saving to a (lit) previously saved preset, the stored data is
overwritten with the new data.
Only one preset address can be selected and saved to at a time.
4 . Press and release the Enter button. The Preset is saved or recalled as desired.
Saving or recalling a Plane Preset
1 . Press the Esc button to clear all pending changes (flashes green once).
2 . Saving a plane preset — Press and hold the Preset button until it flashes red,
then select a plane.
OR Recalling a plane preset — Press and release the Preset button (lights red).
All previously saved presets light red, then select a plane.
N At this time lit presets are global presets, not plane presets.
3 . Select, press and release a plane button. The button lights.
N
At this time the lit global presets extinguish, and any saved plane presets light.
4 . Press and release the desired input button (1-10) to select the plane preset
address to save the current configuration to. Address, Preset, and Enter
buttons flash red .
N Any lit or unlit input button (1 through 10) can be selected to save a preset to.
Only lit presets can be recalled. When saving to a (lit) previously saved preset,
the stored data is overwritten with the new data.
Only one plane preset address can be selected and saved to at a time.