Extricom EXRP-20E, Руководство пользователя

Страница: 28 / 59

20 Installing the Extricom WLAN System
Determining the Location of the Extricom Access
Points
Before installing the switch and access points, plan the placement of the APs. Before permanently
mounting the APs, Extricom recommends testing the network (using a laptop client) to identify
potential coverage holes. If such a problem exists, relocate an AP or add additional APs to resolve
the coverage hole. To find the best location for the required coverage, the Extricom Deployment
Tool may be used.
The APs should be placed in a stable, secure location, such as on top of a closet or bookshelf, or
mounted on a wall.
The switch should be placed near the distribution point of the LAN line. This is usually in the
communications closet of your enterprise.
EXSW-400/800/1200/2400/Multi Series 1000
Switch (EXSW-800G, EXSW-1600)
The Extricom EXSW-400 switch has 6 connectors and 4 LED types on the front panel (refer to
Figure 13).
The Extricom EXSW-800 switch has 10 connectors and 4 LED types on the front panel (refer to
Figure 14).
The Extricom EXSW-1200 switch has 15 connectors and 4 LED types on the front panel (refer to
Figure 15).
The Extricom EXSW-2400 switch has 27 connectors and 4 LED types on the front panel (refer to
Figure 16).
The Extricom Multi Series 1000 Appliance Platform has 21 connectors (refer to Figure 17).
Figure 13: Extricom EXSW-400 Switch
Figure 14: Extricom EXSW-800 Switch