Extreme Networks ExtremeWare Enterprise Manager Скачать руководство пользователя

Страница: 32 / 264

2-2

XTREME

ARE

NTERPRISE

ANAGER

NSTALLATION

AND

SER

UIDE

NSTALLING

THE

XTREME

ARE

NTERPRISE

ANAGER

Note:

See the

ExtremeWare Enterprise Manager Release Notes

for the most current

information on installation requirements.

The ExtremeWare Enterprise Manager server installation process installs two
components:

•

The ExtremeWare Enterprise Manager Database Engine

•

The ExtremeWare Enterprise Manager Web Server

NSTALLING

INDOWS

NT S

YSTEM

The following sections assume that Microsoft Windows NT is already running.

Note:

For information on installing and running Windows NT, refer to the
documentation supplied with your Microsoft Windows NT software.

NSTALLING

THE

NTERPRISE

ANAGER

ERVER

To install the ExtremeWare Enterprise Manager components under Windows NT you
must have Windows NT administrator privileges.

If you have a previous release of ExtremeWare Enterprise Manager installed (1.0 or 1.1)
the installation script will also handle migrating your database information to the new
Enterprise Manager 2.0 installation.

Note:

To update an evaluation copy of the Enterprise Manager to a licensed copy

without

reinitializing the database, follow the update procedure described in the

section “Updating an Evaluation Version to a Licensed Version."

To install the ExtremeWare Enterprise Manager, follow these steps:

Close any open applications.

Insert the CDROM into the CDROM drive.

In most cases, the ExtremeWare Enterprise Manager Welcome screen appears
automatically. If it does not:

Choose Run from the Start Menu.
The Run dialog box appears.

Type

d:\nt\setup

in the text box and click OK.

If the CDROM is not drive

, substitute the correct drive letter.

Содержание ExtremeWare Enterprise Manager









































































































































































































































































Результаты поиска

Содержание ExtremeWare Enterprise Manager

Отзывы:

Похожие инструкции для ExtremeWare Enterprise Manager

Бренды по названию

Популярные бренды

Extreme Networks ExtremeWare Enterprise Manager, Инструкция по установке и эксплуатации

Результаты поиска

Содержание ExtremeWare Enterprise Manager

Отзывы:

Похожие инструкции для ExtremeWare Enterprise Manager

Бренды по названию

Популярные бренды