Extreme Networks ExtremeWare Enterprise Manager, Инструкция по установке и эксплуатации

Страница: 113 / 264

E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
6-15
U
SING
T
ELNET WITH
C
ISCO
D
EVICES
• To copy from an interactive session, highlight the lines you want to copy, click the
right mouse button and select Copy from the pop-up menu.
• To paste into another window, display the window, place the cursor where you want
the lines inserted, click the right mouse button and select Paste from the pop-up
menu.
M
ACRO
R
ECORDING AND
P
LAYBACK FROM AN
I
NTERACTIVE
T
ELNET
S
ESSION
The Record function creates a macro by echoing commands you type in an interactive
Telnet session, into the macro Record/Play Buffer. It is implemented with commands
from a pop-up menu displayed by using the right mouse button (see Figure 6-12).
•
To start recording a macro, click the right mouse button and select Start Record from
the pop-up menu.
Everything you type after this until you select Stop Record from the pop-up menu,
will be copied into the macro Record/Play Buffer.
• To stop recording a macro, click the right mouse button and select Stop Record from
the pop-up menu.
• To play back the macro to multiple switches, select Telnet in the Component tree,
and play back the macro in the main Telnet page as discussed in the section
“Running ExtremeWare Command Macros” on page 6-11.
• To play the macro on an individual switch, select the switch in the Component Tree
to display its interactive telnet session, click the right mouse button, and select Play
from the pop-up menu.
U
SING
T
ELNET WITH
C
ISCO
D
EVICES
You can open an interactive Telnet session on a Cisco device and execute commands
interactively. Select the switch from the Telnet switch list in the Component Tree. This
opens a Telnet session to the selected switch, and waits for command input, just as with
any other Telnet session (see Figure 6-12).