Extreme Networks ExtremeWare Enterprise Manager, Инструкция по установке и эксплуатации

Страница: 249 / 264

E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
D-1
D
ExtremeWare Enterprise
Manager Properties Files
This chapter describes several properties files used by ExtremeWare Enterprise
Manager:
•
extreme.properties
— ExtremeWare Enterprise Manager configuration
parameters.
•
ciscoipports.properties
— Cisco’s mapping of names to well-known ports.
These files are both found in the extreme subdirectory of the installation directory (by
default
eem2_0\extreme
).
T
HE
extreme.properties
F
ILE
This file contains default values for a number of ExtremeWare Enterprise Manager
configuration parameters, including the SNMP polling interval, the SNMP request
time-out, the number of SNMP request retries, and several timeout values. This file is
found in the
< install_dir\extreme>
directory. The defaults and value restrictions are
as indicated in the file, listed below.
#This file has user configurable parameters for SNMP operations.
#Polling interval in seconds to refresh status of each switch
#Default=300, Minimum=5, Maximum=3600 (1 hour)
Snmp.PollInterval=300
# Number of seconds after which an SNMP request should first time out.
# This is followed by an exponential backoff
# Default=2, Minimum=1, Maximum=10 seconds