2
If you have any questions regarding this product and its safe use, or if there are any missing or damaged parts, DO NOT return Boat Lift Boss
™
to the retailer.
Call the Boat Lift Boss
™
Service Department at: 651-357-1874 or e-mail - [email protected]
Installation Kit Contents:
Qty. Description ............................................................................................ No.
1 - Instruction Sheet
1 - Aluminum Spacer ......................................................................................... 1
1 - Torque Arm ................................................................................................... 2
1 - Drive Stub ..................................................................................................... 3
1 - Loctite
®
.......................................................................................................... 4
1 - Hardware Kit (1103.1210)
1 - 3/8” x 1-1/4” (0.95cm x 3.17cm) Diameter Thick Fender Washer ....... 5
1 - 3/8” (0.95cm) Lock Washer .................................................................... 6
1 - 3/8” x 2-3/4” (0.95cm x 6.98cm) Main Mounting Bolt, 24 Pitch .......... 7
1 - 1-3/4” x 3/8” (4.44cm x 0.95cm) Bolt..................................................... 8
1 - 1-1/4” x 3/8” (3.17cm x 0.95cm) Bolt..................................................... 9
2 - 3/8” (0.95cm) Lock Nuts ....................................................................... 10
4 - 3/8” (0.95cm) Flat Washers .................................................................. 11
1 - 5/8” x 3” (1.58cm x 7.62cm) Hardened Tap Bolt, 18 Pitch Puller...... 12
3
1
12
11
10
8
9
4
7
6
5
2
Loctite
®
Remove
Location of lower torque arm
Note: Nut goes inside the box
Rubber Plug
Congratulations! You’re minutes away from the
convenient and quiet operation of Boat Lift Boss
™
.
Important:
The Puller Bolt is not used for
installation. It is required for uninstalling
your Boat Lift Boss. Please put the Puller
Bolt in a safe place. Instructions can be
found on the Boat Lift Boss™ Maintenance
& Service sheet in the motor packaging box.
12
Tools Required for Installation
• 9/16" (1.42cm) socket with ratchet
• 9/16" (1.42cm) wrench
• 10mm wrench (optional)
7
6
5
9
11
3
1
11 10
2
8
11
10