22. Install the receiver at the rear of the battery tray using Velcro. Use Velcro to secure
the battery to the battery tray and use a Velcro strap around the battery.
23. Use the supplied nylon bolts to secure the wings to the fuselage. They insert
from inside the fuselage through the hole behind the wing tube and into the blind nut in
the root rib of the wing. Tighten until snug.
24. The battery should mount right in front of the receiver. Adjust the location of the
battery to achieve proper CG.
This concludes the assembly of the Vanquish MKII.
