Extreme Flight Legacy Aviation Muscle Bipe, Инструкция по сборке

Страница: 26 / 29

Now choose a location to mount your receiver, we used the platform that is located just inside
the removable hatch on the bottom of the fuselage. We also used an Aura flight control system
(gyro) and mounted it on the aft portion of the battery tray. See figure 32.
Figure 32
Any satellite receivers can be mounted to the fuselage sides.
The wings are mounted by sliding the carbon tubes into the wing receptacles and then slide one
wing on at a time, be sure the tube is fully inserted into the wing before installing the remaining
wing half. It does not matter if you install the upper or lower wings first. Once the wings are
installed and bolted on using the (4) supplied 3mm bolts/washers then install the struts. The
struts are installed by orientating the larger end on the lower wing. Gently pull the top and
bottom wing tips apart just enough to slide the strut into the slots for the. I prefer to insert the
top portion first then the lower portion into the bottom wing. Next locate the 4 pins and insert the
pointed end into the leading edge of the wing and slide them all the way till about ¼” of the pin
is protruding. Do not push the pins flush with the wing’s leading as they will be difficult to
remove should you ever want to disassemble the airplane. See figures 33 and 34.