Extreme Flight Legacy Aviation Muscle Bipe, Инструкция по сборке

Страница: 11 / 29

Figure 9
Tailwheel assembly
5. Locate the tailwheel assembly and associated hardware, then review figure 10 for parts
identification. We begin by mounting the tailwheel bracket mounting flat to the fuselage, trial fit
first to be sure it is centered side to side then the pivot point of the bracket has to be centered to
the rudder hinge line. Once the fit is correct, use a centering drill or similar to make pilot holes
then install the 2 small wood screws and tighten. We will secure the tiller arm portion to the
bottom of the rudder later in the assembly process, be sure to save that 3
rd
wood screw for that
process. See figure 11.
TIP: applying a small drop of thin CA to either the wood screw or the pilot hole will help the
screws to hold better.