Extreme Flight 60 EXTRA 300 EXP, Инструкция по эксплуатации

Страница: 4 / 21

4
Items needed for completion
-Masking tape
-Hobby knife with #11 blades
-Razor saw
-Fresh bottle of thin and medium CA
-Blue Loctite.
-Silicon based glue (Zap-A-Dap-A-Goo, etc.)
-Electric drill with an assortment of small drill bits.
-Small flat head and Phillips head screw drivers.
-Standard and needle nose pliers.
-Metric balldriver or allen key set.
-4 micro metal geared servos. All flight testing was performed with Hitec HS-5087MH
digital servos.
-Xpwr T3910 Brushless Outrunner motor.
-Airboss Elite 80 Amp ESC (Timing must be set to high with the Xpwr 3910 motor).
-4S 2500-3300 mah LiPo battery.
-XOAR 14x8 or 15x7 PJN propeller.
-57mm Extreme Flight spinner.
-2 Extreme Flight 28awg 18"extensions for the 2 rear servos and 2 6"extensions to go
between the receiver and the aileron servo leads.
-Adhesive backed Velcro and Velcro strap for ESC mounting and battery retention.
-Extreme Flight lightweight aluminum servo arms for ailerons and rudder, a G10 arm is
included for elevator.