Extreme Flight 60 EXTRA 300 EXP, Инструкция по эксплуатации

Страница: 18 / 21

18
23. For quick, easy and accurate mounting of the cowl we recommend the
following method. Tear 4 short pieces of masking tape from a roll. Place each
piece of tape on the side of the fuselage so that each piece corresponds with
one of the 4 cowl mounting tabs. Use a fine tipped marker to mark the
location of the center of each mounting tab. Roll the tape back and slide the
cowl into position. Install an Extreme Flight 57mm spinner onto the motor
shaft for reference and once satisfied with the cowl position roll the tape back
into place and secure the cowl. Use a 1/16" drill bit to drill a hole at the
location of the dot on each piece of tape. Remove the tape and secure the cowl
with 4 of the included small wood screws that have integrated washers. Very
simple!