Extreme Flight 60 EXTRA 300 EXP, Инструкция по эксплуатации

Страница: 11 / 21

11
9. Locate the fuselage, 2-3mm socket head cap bolts and 2 washers. Secure
the landing gear to the fuselage by inserting a 3mm screw into a washer,
through the carbon fiber gear and into the pre-installed blind nut in the
fuselage. Make sure to use a drop of blue Loctite on each screw to prevent
them from backing out
.
10. Locate the horizontal stabilizer/elevator assembly and slide the elevator
off of the hinges. Use a razor saw to remove portion of the rudder post
located behind the elevator slot.