Extraflame GUENDA IDRO, Руководство пользователя

Страница: 19 / 36

1
2 3
4
5
6
1 4
3
2
5
6
19 ENGLISH
General menu
go back - exit
scroll parameters: next (3); previous (2)
Change settings data: increase (4); decrease (5)
Confirm - access menu
General warnInGs
advice to follow for the first start-ups of the product:
During the first hours of operation, there may be some smoke or
odours, but they are due to the normal “thermal break-in” process.
During this process, the duration of which changes depending on
the product, it is recommended to:
Š
Ventilate the room well
Š
if present, remove any majolica or natural stone parts from the
top part of the product
Š
activate the product at the maximum power and temperature
Š avoid remaining in the room for a long time
Š
Do not touch the surfaces of the product
Notes:
The process is completed after a few heating/cooling cycles.
For combustion, do not use elements or substances other than those
indicated in the manual.
Before turning on the product, it is necessary to perform the
following checks:
Š
if it is intended to be connected to a hydraulic system, it must
be complete and fully functional and in compliance with the
instructions given in the product manual and with the relevant
regulations in force.
Š
The pellet hopper must be fully loaded
Š
The combustion chamber and the burn pot must be clean
Š
make sure that the fire holder, the ash drawer and the pellet
hopper close hermetically (if present in the hermetic version); they
must be closed and there must be no foreign bodies in the sealing
elements and gaskets.
Š
Check that the power cord is properly connected
Š The bipolar switch (if present) must be set to position “1”.
VENtiLatiON ENaBLiNG
SPEED
EaSY SEtUP SEt SEt thERMOStat
chRONO ENaBLiNG
PRG1
PRG2
SEttiNGS DatE-tiME PRG3
LaNGUaGE PRG4
DiSPLaY
StaND BY
FiRSt LOaD
OUtLEt aiR
cLEaNiNG
*StOVE StatUS DEGREES
*
TeCHNiCiaNs ONLY
RESEt
*tEch MENU EaSY cONtROL
**SYStEM SEt DEPRESSURE NOticE
**SYStEM Stat
**wiTH sYsTem exPaNsiON BOarD ONLY (OPTiONaL)
DO NOt USE aNY tYPE OF FLaMMaBLE LiQUiDS FOR iGNitiON!
DO NOt aLLOW thE BaG OF PELLEtS tO cOME iNtO cONtact With thE BOiLiNG hOt StOVE DURiNG thE FiLLiNG
PhaSE!
iN thE EVENt OF cONtiNUED FaiLURE tO LiGht, cONtact aN aUthORiSED tEchNiciaN.