Extraflame COMFORT PLUS CRYSTAL, Руководство пользователя

Страница: 9 / 36

A
9 ENGLISH
FroNT PELLET FEEDING kIT (oPTIoNAL)
The optional pellet feeding kit allows pellets to be fed into the feed-
box from the front without having to extract the insert (operation
that requires machine switch-off).
Further information on the accessories is available on the website,
in the category "accessories".
AIr CIrCULATIoN PIPES
Create air recirculation inside the structure that covers the insert for correct operation. This prevents the appliance from over-heating.
To guarantee this, just make one or more openings in the lower and upper parts of the covering.
PEDESTAL ASSEMBLY (oPTIoNAL):
Position the base in the desired point and use the feet to adjust the desired
height (the bolts are positioned in the four external sides of the pedestal in
the lower part).
Remember the power socket on the rear of the pedestal so that the plug is
accessible once installation is completed.
Fix the pedestal to the floor using strong steel plugs with a diameter of 8
mm.
Fix the sliding base to the frame using bolts.
Connect the flue gas exhaust pipe and the air vent as stated in the previous
paragraph.
Take the insert, tilt it so that the wheels fit into the relative rails, make it run
until the flue gas auger is completely inserted into the flue gas conveyor box.
Finally open the fire door and use the supplied Allen key to turn the screw at
the bottom left corner clockwise.
To understand whether the insert is correctly attached to the base, connect
the plug to the socket and make sure the display switches on.
Mount the hopper support for the pellet and insert it into the relevant
coupling.
PrIMArY AIr vENT:
ThE AIr vENT MUST BE MADE oUTSIDE ThE FLUE AS
IT MUST NoT SUCk IN ovErhEATED AIr.
PErForMING ThIS CoNNECTIoN INCorrECTLY CAN
jEoPArDISE ProDUCT oPErATIoN.
Primary air
intake
pipe
N.B.If our pedestal is used, a slot must be created in the flue that allows the pellet level in the feed-box to be checked, thus preventing spillage during
filling.