Extraflame COMFORT PLUS CRYSTAL, Руководство пользователя

Страница: 12 / 36

12 ENGLISH
The 2 side frames are fixed to the upper frame by means of 2 screws
each side.
The remaining holes on the side frames allow to fix the entire frame
to the sides of the machine by means of self-drilling screws.
MoUNTING ThE FrAMES
Š
Front frame
Š
Side frames
N.B. Any wooden beams located above the insert must be protected
with non-inflammable material.
Frame assembly is important as it allows correct recirculation of the
air and consequently optimal product operation.
PELLETS AND FEEDING
The pellet used must comply with the features described by
Standards
Š
EN PLUS - UNI EN 14961 - 2 (UNI EN ISo 17225-2) class
A1 - A2
For its products, the manufacturer always recommends
using pellets with a diameter of 6 mm.
To guarantee combustion without problems, the pellets must be
kept in a dry place.
We recommend using pellets with a diameter of 6 mm with our
products.
See the images for feeding pellets.
ThE USE oF Poor QUALITY PELLETS or ANY oThEr MATErIAL DAMAGES ThE FUNCTIoNS oF YoUr STovE AND
CAN voID ThE wArrANTY AND ThE rESPoNSIBILITY oF ThE MANUFACTUrEr
.
J
oPEN ThE TANk LID AND LoAD ThE PELLETS USING A SCooP.
IN ThE EvENT oF ThE INSErTS, oNLY LoAD whEN ThE MAChINE IS oFF AND CoLD, BY ExTrACTING IT FroM ThE
CoMPArTMENT.
IN ThE EvENT oF INSTALLATIoN wITh FEEDING kIT (oPTIoNAL) ThE MAChINE MUST NoT BE ExTrACTED.