Extraflame COMFORT PLUS CRYSTAL, Руководство пользователя

Страница: 23 / 36

23 ENGLISH
*2nD TIme SlOT SWITCH-On
at this point, the second time slot must be programmed.
The sequence to be followed is the same and is repeated as per the 1ST TIme SlOT SWITCH-On.
On this occasion simply enter the time, for example start at 15:00 and Stop at 22:00 and to activate the days Saturday and Sunday by setting
them at "On".
J
when the weekly proGrammer is aCtive, a box of the relative iCon will appear on the
Control boarD.
proGramminG example
let's suppose that the weekly programmer function is to be used and 4 time slots are to be used in the following way:
- 1st time slot: from 08:00 to 12:00 every day of the week, with room temperature at 19°C, excluding saturday and sunday
- 2nd time slot: from 15:00 to 22:00 only on saturday and sunday, with room temperature at 21°C
COnTrOlS prOCeDure:
press key 6 and SeT ClOCK will appear.
press key 2 until
enable chrono
appears
enable the chrono
enable slot 1 and 2.
press key 1 to exit
set
CloCk
enable
Chrono
1ST TIme SlOT SWITCH-OFF
use keys 4 - 5 to enter the time “ 12:00 ”,
which corresponds to the switch-off time of
the 1st time slot.
To confirm and continue programming,
press button 6. press button 3 to go back to
the previous parameter.
stop prG1
12:00
* Where “ENABLE CHRONO” is not present
in the menu, enabling is done directly in
SET CHRONO.
COnTrOlS prOCeDure:
press key 2 and
set Chrono
will appear.
Chrono
settinG
enaBlIng THe 1ST TIme SlOT DaYS
To enable/ disable the days use keys 4 and
5; key 2 and 3 to scroll the various days, the
day of the week will appear, followed by
off
select from monday to Friday on on ,
excluding Saturday and Sunday (OFF)
monDay..prG1
on-off
press key 6 to confirm and continue
programming.
start prG1 off will appear.
start prG1
off
1ST TIme SlOT H2O TemperaTure
SeTTIng
press key 6 to confirm and continue
programming.
using buttons 4 - 5 select the desired
temperature.
(low -07 - 40°C Hot)
To confirm and proceed press key 6.
set prG1
19°C
1ST TIme SlOT SWITCH-On
use keys 4 - 5 to enter the time “
08:00
”,
which corresponds to the switch-on time of
the 1st time slot.
To confirm and continue programming,
press button 6. press button 3 to go back to
the previous parameter.
start prG1
08:00
2nD TIme SlOT SWITCH-On*
at this point, the second time slot must be
programmed.
The sequence to be followed is the same
and is repeated as per the 1ST TIme SlOT
SWITCH-On.
start prG2
off