Extraflame COMFORT PLUS CRYSTAL, Руководство пользователя

Страница: 29 / 36

29 ENGLISH
ALARMS
DISPLAY EXPLANATION SOLUTION
1
1
1
1
The fixed triangle on the display and
key 1 flashing slowly indicate the
presence of an alarm.
On and flashing: indicates the presence of an alarm
The alarm can be reset by pressing button 3 for 3 seconds only if
the fumes motor has stopped and if 15 minutes have elapsed from
when the alarm was displayed.
DISPLAYS
DISPLAY REASON
Off
Stove off
START
The start phase is in progress
PELLET fEEDINg
Pellet feeding during the ignition phase is in progress
IgNITION
The ignition phase is in progress
START-UP
The start phase is in progress
WORk
The normal work phase is in progress
MODULATION
The stove is modulating
BURN POT CLEANINg
The automatic burn pot cleaning is in progress.
fINAL CLEANINg
When the stove is switched-off, final cleaning is in progress. The final cleaning phase lasts about 10
minutes.
STAND BY
Stove off due to temperature reached and in stand-by for re-ignition.
STAND BY EXT
Stove off due to an external thermostat, in stand-by for re-ignition
COOLINg STAND-BY
A new ignition is attempted when the stove has just been switched off. When the stove switches off, one
must wait for the complete shutdown of the fumes motor, then clean the burn pot.
The stove can only be re-ignited when these operations have been performed.
COOL. STDBY
BLACk OUT
The stove is cooling due to black out
LOW
Room thermostat set at minimum value.
In this mode the stove only works at 1st power independently from the power set. To exit this function
just raise the room temperature using button 4 and then key 2.
HOT
Room thermostat set at maximum value.
The stove works at the set speed, without ever modulating. To exit this function just lower the set
temperature using button 4 and then key 1.
PELLETS
LOW
The "PelleTS lOW" message combined with key 1 flashing slowly indicates that the pellets tank is at
minimum.
With the machine switched off and fully cooled down, load the pellets tank.
1