Extraflame ANGELA, Руководство пользователя

Страница: 12 / 36

ENGLISH
Pellets and loading
Pellets are made by subjecting wood shavings i.e. the rejects of pure unpainted wood from sawmills, carpentry products and products from
other activities connected to wood working and transformation, to very high pressures.
This type of fuel is fully ecological as no glues are used for its compaction. In fact, pellet compactness is guaranteed over time by a natural
substance found in wood: lignite.
In addition to being an ecological fuel, making best use of wood residue, pellets also have a series of technical advantages.
While wood has a calorific value of 4.4 kWh/kg (with 15% moisture, therefore after approximately 18 months of curing), that of pellets is 5
kWh/kg.
Pellet density is about 650 kg/m
3
and water content is equal to 8% of its weight. For this reason pellets do not need to be cured to obtain a
sufficient heat yield.
tHe Use oF PooR QUalitY Pellets oR anY otHeR MateRial Will CoMPRoMise stoVe FUnCtions, Voiding
tHe WaRRantY and Releasing tHe ManUFaCtUReR oF liaBilitY.
The pellet type must comply with the specifications set forth by
Standards:
Š
en PlUs - Uni en 14961 - 2 (Uni en iso 17225-2) class a1
- a2
The Manufacturer recommends using pellets with a diameter of
6mm with its products.
Pellet stoRage
To guarantee efficient combustion, pellets must be stored in a dry
place.
Open the hopper lid and load the pellets using a scoop.
Pellet HoPPeR - PRessURised ClosURe.
During stove operation, the pellet hopper lid and the door must always be closed.
Failure to comply with any of the above-described steps during operation will cause the display to show the following:
"
CLOSE HOPPER - STOVE DOOR
"
This indication means that you have 60 seconds to close the hatch/door and the pellet lid.
Once 60 seconds have passed, during ignition the stove will go into "DEPR ALARM" mode, while during normal operation the stove will go
into "COOLING STAND-BY" mode before automatically restarting when the conditions are satisfied (cold stove, etc.).
Keep clean
DO nOT PLaCE THE bag DiRECTLy On THE STOVE TO LOaD THE Tank.
aLwayS uSE a SCOOP TO LOaD THE Tank. DO nOT Rub OR PLaCE wEigHTS On THE Tank SEaL. kEEP THE Tank COVER
SEaL SuPPORTing SuRfaCE CLEan aT aLL TimES. CHECk THE COnDiTiOnS Of THE SEaL fREquEnTLy. if DamagED,
COnTaCT yOuR LOCaL auTHORiSED TECHniCian.
12