Extraflame 001284000, Руководство пользователя, Страница: 24 / 40

24 ENGLISH
enaBlInG/dIsaBlInG the Chrono
CONTrOLs PrOCeDUre
Š
Press key 6.
Š
Press 3 until CHRONO appears and confirm by pressing key 6.
Š Confirm
ENABLINg
by pressing 6.
Š Use keys 4 -5 to enable (
ON
) or disable (
OFF
)
Š Press key 6 to confirm and key 1 to scroll back through the menus until the initial page.
J
If the weekly Chrono Is aCtIve on the Control panel, a small ICon Is dIsplayed
CHRONO > ENABLINg > PRg1
On/off Enable/disable PRG 1
>
PRg2
On/off Enable/disable PRG 2
>
PRg3
On/off Enable/disable PRG 3
>
PRg4
On/off Enable/disable PRG 4
PRg1 > START PRg1
OFF-00:00 PRG1 ignition time
>
STOP PRg1
OFF-00:00 PRG1 switch-off time
>
MONDAY...SuNDAY
On/off Enable/disable days PRG1
>
SET PRg1
LOW-TA - 07- 37 °C - HOT Set thermostat PRG1
>
POWER PRg1
1-5 Set power PRG1
PRg2 > START PRg2
OFF-00:00 Ignition time PRG2
>
STOP PRg2
OFF-00:00 Switch-off time PRG2
>
MONDAY...SuNDAY
On/off Enable/disable days PRG2
>
SET PRg2
LOW-TA - 07- 37 °C - HOT Set thermostat PRG2
>
POWER PRg2
1-5 Set power PRG2
PRg3 > START PRg3
OFF-00:00 Ignition time PRG3
>
STOP PRg3
OFF-00:00 Switch-off time PRG3
>
MONDAY...SuNDAY
On/off Enable/disable days PRG3
>
SET PRg3
LOW-TA - 07- 37 °C - HOT Set thermostat PRG3
>
POWER PRg3
1-5 Set power PRG3
PRg4 > START PRg4
OFF-00:00 Ignition time PRG4
STOP PRg4
OFF-00:00 Switch-off time PRG4
MONDAY...SuNDAY
On/off Enable/disable days PRG4
SET PRg4
LOW-TA - 07- 37 °C - HOT Set thermostat PRG4
POWER PRg4
1-5 Set power PRG4
Chrono
This function allows stove ignition and switch-off to be automatically programmed.
The factory setting for CHRONO is off.
The chrono allows the programming of 4 time slots per day, which can be used every day of the week.
for each time slot, it is possible to set ignition and switch-off times, specific days of application, desired temperature and set power.
Current day and time settings are essential for the correct operation of the Chrono.
Recommendations
Before using the chrono function, it is necessary to set the current day and time. Therefore, check that the points in the sub-chapter
“DATE-TIME” have been followed. To use the chrono function correctly, it must not only be programmed, but also enabled. The 4 time
slots can be overlapped using the ignition and switch-off time settings. In this way, it is possible to create a combination of time slots
with different temperatures and power levels, without changing the status of the stove.
N.B.: in the case of overlapping time slots, the stove will remain on until the last switch-off time.