Extraflame 001284000, Руководство пользователя

Страница: 18 / 40

18 ENGLISH
InseRtIng the batteRIes
Remove the battery compartment cover by sliding it down. Insert 2 AAA
batteries.
Insert the batteries respecting the correct polarity (+) and (-).
Close the cover of the battery compartment.
Respect the environment!
Used batteries contain metals that are harmful to the environment, and therefore must be disposed of separately in
special containers.
If the Remote contRol Is swItched off due to no batteRy
Installed, the stove can be contRolled fRom the
command panel located on the uppeR paRt of the stove.
when changIng the batteRIes, make suRe you follow the
symbols pRInted InsIde the Remote contRol.
Remote contRol Icons
advIce and pRecautIons foR the use of the
Remote contRol
Š Remove the batteries if it is not used for a long time.
Š When being used, direct it towards the stove's signal receiver.
Š
Handle the remote control with care. When it is not being used, place it
on the special base supplied.
Š
The remote control must not be left in a place where it is exposed to
direct sunlight or near a source of heat.
Š The quality of the signal may be affected by other IR sources.
Air mode selected:
Flashing COMFORT
On AUTO
Enable chrono
Light on = activated
Light off = deactivated
Set switch-off delay
Indicates the transmission of the radio
signal
On = during all radio communication
Off = radio communication absent
Battery low Keys locked
Set power level.
The power level is displayed, instead of the set room temperature, for 3 seconds when one of the set
power buttons is pressed (4).
J
The RemoTe conTRol is fiTTed wiTh an lcd backliT display. The backlighTing lasTs 20 seconds fRom The
lasT pRess of a buTTon. afTeR a ceRTain Time, To save baTTeRy poweR, The display TuRns off (eneRgy saving
mode).
The conTRol funcTions aRe ReacTivaTed when The RemoTe is Removed fRom iTs uniT oR by a long pRess of
The buTTon.