81
80
EN
EN
II. Technical specifications
Model/order number
8894580
Nail head type
D
Nail head diameter
6.8-7.7 mm
Nail stem diameter
2.9-3.3 mm
Nail angle in strip
34°
Nail length
50-90 mm
Nail surface
smooth or ribbed
Nail firing speed
20/min
Number of driven nails per single battery charge
5000
Number of driven nails per single 80 ml gas can
1200
1)
Part number of the gas can
BOSTITCH FC80MLHPB or equivalent
Gas can connection adapter type
low (see fig.11)
Nail gun magazine capacity
50 nails
Weight of the nail gun with battery without nails
3.7 kg
Impact energy
80 J
Battery specifications (type, rated voltage,
Li-ion; 7.2 V DC
capacity, watt-hour load)
1.5 Ah; 10.8 Wh
Number of supplied batteries
2
Battery charging time
2.5 h.
Acoustic pressure level L
pA
; uncertainty K
67.08 dB(A); K = ± 4 dB (A)
Acoustic power level L
wA
; uncertainty K
78.08 dB(A); K = ± 4 dB (A)
Vibration level on the handle; (sum of three axes); uncertainty K
2.67 m/s
2
; K=±1.5 m/s
2
2)
1)
The specified number of driven nails is based on the
specification of the manufacturer BOSTITCH for the
can model type FC 80MLHPB and may differ slightly
depending on manufacturer.
NAILS AVAILABLE FOR PURCHASE IF REQUIRED
Model number/
Part number
Length
Type
Number
8862603
50 mm
ribbed
480 pcs
8862604
75 mm
ribbed
480 pcs
8862605
90 mm
ribbed
480 pcs
8862606
50 mm
smooth
480 pcs
8862607
75 mm
smooth
480 pcs
8862608
90 mm
smooth
480 pcs
Table 1
2)
•
ATTENTION
y
The declared vibration emission level value
is a characteristic value related to the tool
and does not represent the effect on the
hand-arm limb during the use of the tool.
Any effect on the hand-arm limb during the
use of the tool will, for example, depend on
the grasping force, contact downward pre-
ssure, work direction, power source settings,
workpiece and support of the workpiece.
y
Depending on the conditions and location
of the workpiece, take steps to reduce noise,
e.g. by placing the workpiece on an under-
lay reducing the noise level, by reducing the
vibration of the workpiece by clamping or
covering it, setting a lower required pressu-
re for specific parts of the work.
Introduction
EN
Dear customer,
Thank you for the confidence you have shown in the Extol® brand by purchasing this product.
This product has been tested for reliability, safety and quality according to the prescribed norms and regulations
of the European Union.
Contact our customer and consulting centre for any questions at:
www.extol.eu
Manufacturer
: Madal Bal a. s., Průmyslová zóna Příluky 244, 76001 Zlín, Czech Republic
Date of issue
: 1. 4. 2021
I. Description – purpose of use
Powerful ignition gas powered nail gun for structures
that is intended for demanding joining work in elevated locations
and at construction sites without access to el. power or compre-
ssed air, for building structures from wood, e.g. joining roof
timberwork and entire wooden buildings, for making crates, etc. with the use
of smooth or ribbed nails of lengths 50-90 mm at a strip angle of 34° (other
necessary dimensions are provided in the technical specifications).
y
The nail gun is powered by ignited gas and enables many
more nails to be driven per single gas can (up to 1200 pcs)
and 5000 pcs per single battery charge than is possible with
a cordless nail gun powered by an electric motor that uses
only electricity from a battery for the same nail dimensions,
which is very advantageous for long lasting work at heights and at construction sites without an el.
power source.
y
Since the nail gun is not powered using a heavy electric motor, but rather by means of ignited gas from a light
gas bottle, the ignition of which is performed simply by means of a spark, the nail gun only contains a small,
light, removable, rechargeable Li-ion battery.
Thanks to its light weight the nail gun is extremely valued for less demanding work
where it is
necessary to hold the nail gun
for extended periods of time with one's arms raised in the air
.
y
Spare cans with flammable gas of volume 80 ml intended for powering gas nail guns can be purchased in stores,
e.g. from the manufacturer BOSTITCH, part number of the gas can: FC 80MLHPB; or an equivalent from other
manufacturers.
y
The nail gun is intended only for use
in well-ventilated environments.
The nail gun enables the setting of the
depth
to which the nail is driven into the wood.
