75
74
EN
EN
III. Parts and control elements
1
2
3
10
8
7
6
5
9
4
Fig. 1
Fig. 1, position-description
1) Rivet bolt
2) Rivet gun barrel
3) Rivet bolts for various rivet body diameters (the rivet
body diameter is marked on the head of the bolt)
4) Motor ventilation openings
5) Carbon brush housing cover
6) Belt hook
7) Handle
8) Power cord
9) Power switch
10) Trigger
II. Technical specifications
Model/order number
8794550
Power input
400 W
Input voltage/frequency
220-240 V ~50 Hz
Rivet body diameter
1)
3.2 – 4.0 – 4.8 mm
Rivet body material
All metals
Pulling force
≤ 8000 N
Overall lift height
22 mm
Length of the power cord
2.5 m
Sound pressure level LpA
78.1 dB(A) ; uncertainty K=±4 dB(A)
Sound power level LwA
88.2 dB(A) ; uncertainty K=±4 dB(A)
Max. vibration on the handle (sum of three axes)
˂
2.0 m/s
2
; uncertainty K=±1.5 m/s
2
Weight without the power cord
2.3 kg
Protection
IP2X
Protection class
II (double insulation)
Table 1
1) This is not a rivet mandrel that is torn off after being pulled. The diameter of the rivet body corresponds to the dia-
meter of the rivet mandrel for which the rivet bolt with the specified diameter of the rivet body on the head of the
rivet bolt is intended, which is screwed into the barrel of the rivet gun.
y
The declared aggregate vibration value and the declared noise emission level were measured in accordance with
standard testing methodology and may be used for the comparison of one tool with another. The declared aggregate
vibration value and the declared noise emission level may also be used for determining preliminary exposure.
•
WARNING
y
Vibration and noise emissions during actual use of the tool may differ from the declared values depending on the
method in which the tool is used, particularly the type of work piece that is being worked on.
y
It is necessary to determine the safety measurement for the protection of the operator, which is based on the assess-
ment of exposure under real operating conditions (to include all the parts of the work cycle such as time for which the
tool is turned off and when running idle outside the time that it is in operation).
