PQ3450-EU-EN-V1.2-05/12
17
5.0 Power Measurement Procedures
5.1 1
Φ
2W (Single Phase - Two Wire) Measurement
1.
Power the instrument ON by pressing the ‘Power’ key, and then use the ‘1
Φ
3
Φ
’ key to
select the 1
Φ
2W system, the selected name of the system will be shown on the bottom left
side of the display
2.
Connect the line voltage L1, Vn (Neutral) to V1 and N terminals of the
instrument.
3.
Connect the Clamp (A1) to the conductor (A1)
4.
Connect Clamp 1 (A1) to the A1 terminal of the instrument
5.
The related measurement factors will appear on the display
6. Measurement
definitions
can be found in Section 5-10
1
Φ
2W Screen
Shop for Data Logging products online at:
www.
DataLoggerStore
.ca
1.877.766.5412
