PQ3450-EU-EN-V1.2-05/12
14
4.5.5 Formatting an SD Memory Card
1.
In the Setup Mode, use the arrow keys to scroll to the SD FORMAT field
2.
Press and hold the SETUP/ENTER button for at least 2 seconds and the “Y” and “N”
indicators will appear next to the SD FORMAT field
3.
Use the right and left arrow buttons to highlight the desired letter: “Y” to confirm formatting
or “N” to abort the formatting.
4.
While formatting, the field next to the SD FORMAT field will show the formatting progress 0
to 100%.
5.
Note that the display screen shows USE SIZE (amount of memory currently used on the
SD card), FREE SIZE (amount of memory available), and TOTAL SIZE (total size of the
SD card memory) below the SD FORMAT field.
4.5.6 Potential Transformer (PT) Setup
1.
In the Setup Mode, use the up and down arrow keys to scroll to the PT field.
2.
Press SHIFT, the display "SHIFT1" will switch ON
3. Use
the
▲
or
▼
keys to adjust the PT value (the range is 1 to 1000)
4.
Press SHIFT again to return to Setup Mode editing or press EXIT to leave the Setup mode.
4.5.7 Current Transformer (CT) Setup
1.
In the Setup Mode, use the up and down arrow keys to scroll to the CT field.
2.
Press SHIFT, the display "SHIFT1" will switch ON
3. Use
the
▲
or
▼
keys to adjust the CT value (the range is 1 to 600)
4.
Press SHIFT again to return to Setup Mode editing or press EXIT to leave the Setup mode.
4.5.8 Audible Beeper ON/OFF
1.
In the Setup Mode, use the up and down arrow keys to scroll to the BEEP field.
2.
Press SHIFT, the display "SHIFT1" will switch ON
3. Use
the
▲
or
▼
keys to select ON or OFF
4.
Press SHIFT again to return to Setup Mode editing or press EXIT to leave the Setup mode.
4.5.9 SD Card Numerical Format (USA or European)
Note: SD Memory Cards default to the basic numerical format (USA) whereby a period is used
to separate units from tenths, for example: 20.00. European formatting uses a comma (for
example: 20,00).
1.
In the Setup Mode, use the up and down arrow keys to scroll to the DECIMAL field.
2.
Press SHIFT, the display "SHIFT1" will switch ON
3. Use
the
▲
or
▼
keys to select the desired format USA (.) or EURO (,).
4.
Press SHIFT again to return to Setup Mode editing or press EXIT to leave the Setup mode.
Shop for Data Logging products online at:
www.
DataLoggerStore
.ca
1.877.766.5412
