381270 v1.2 04/02
9
GRAPHICAL DISPLAY DESCRIPTION
1. The graphical mode is entered when the “
MODE
” key is pressed when the function
switch is in the ACV, DCV, mV, ACA or DCA position
2. The amplitude (vertical) and time (horizontal) divisions are selected automatically
when in the autoranging mode. The time division will vary to display the best wave
pattern in the autoranging mode or can be set manually using the “
F1
” and arrow
keys. The volts/division is determined by the range selected and cannot be varied.
SOFT KEYS AND SUB-MENUS
Function keys
F1
,
F2
,
F3
, and
F4
are located directly below the LCD display and
perform multiple operation as indicated on the LCD and determined by the function
selected by the rotary switch. Some functions will produce a sub-menu on the display
for further selection. Operation of the menus and sub-menus is described in the
appropriate operation paragraph.
