Extech Instruments MultiScope 381270, Руководство пользователя

Страница: 15 / 18

381270 v1.2 04/02
15
(graphical soft key)
The F2 left/right arrow key will “freeze” the waveform on the display and open a sub-
menu which allows time scrolling.
1. Press
F2 to freeze the graphical display.
2. Press the sub-menu F1 or F2 arrow keys to shift the waveform in time.
3. Press the sub-menu F4 “ EXIT ” to return to the graphical display.
SINGLE (graphical soft key)
The F3 “ SING L” key will trigger a single measurement when the key is pressed. and
open a sub-menu which allows time expansion or compression for enhanced
waveform viewing.
1. Press
F3 to trigger a single measurement.
2. Press the sub-menu F2 or F3 arrow keys to change the time/division.
3. Press the sub-menu F1 key to trigger a new measurement.
4. Press F4 “ EXIT ” to return to the graphical display.
GLITC (graphical soft key)
The F4 “ GLITC ” key sets the meter to trigger a measurement on any signal which
causes an overrange indication or is greater than one vertical division or is greater
than 10% of one horizontal
division.
1. Press
F4 to set the glitch
mode.
2. Any glitch will trigger a
measurement.
2. Press the sub-menu F2 or F3
arrow keys to change the
time/division and reset the
glitch trigger..
3. Press the sub-menu F1 key to
reset the glitch trigger..
4. Press F4 " EXIT" to return to
the graphical display.
EXIT
RESET
EXIT