381270 v1.2 04/02
11
mV HI-Z AC AND DC VOLTAGE MEASUREMENTS
1. Turn the rotary switch to the
mV/HI-Z
.
2. Press
F3
to toggle between AC and DC measurement.
3. Press the
HELP
key and then the
F4
key to display
procedures, cautions and connection diagrams
regarding DCV measurements
4. Press the
HELP
key again to exit the HELP screens
RESISTANCE, CONDUCTANCE AND CONTINUITY
MEASUREMENTS.
1. Turn the rotary switch to the “
Ω
“ position.
2. The meter will turn on in the resistance autoranging
mode.
3. Press the
HELP
key and then the
F4
key to display
procedures, cautions and connection diagrams
regarding resistance measurements
4. Press
F2
to activate the continuity beeper .. The
meter will beep if the resistance measurement is less
than 40
Ω
.
5. Press F3 to enter the conductance (nS) mode. Conductance = 1/
Ω
and is displayed
in nS (nano Siemans) from 0025nS to 0999nS (1 to 40M
Ω
)
CAPACITANCE AND DIODE MEASUREMENTS.
1. Turn the rotary switch to the
/
position.
2. Press the
HELP
key and then the “
F4
” key to display
procedures, cautions and connection diagrams
regarding diode or capacitance measurements
3. The meter will turn on in the capacitance autoranging
mode.
4. Press F4 to enter the diode mode.
5. In diode check, the meter will display a diode symbol
and indicate the forward voltage drop across the
diode
mA /
µ
A AC AND DC CURRENT MEASUREMENTS
.
1. Turn the rotary switch to the
mA/
µ
A
position.
2. Press the
HELP
key and then the “
F4
” key to display
procedures, cautions and connection diagrams
regarding current measurements
3. The meter will turn on in the DC
µ
A mode.
4. Press F4 to change to AC measurements.
5. Press F3 to change to the mA mode.
