8 MC200-EU-EN V2.1 07/13
The modes that are shown with the symbol are for automatic repetition mode.
When one of these modes is selected, use the
or button to stop/start the
repetition. The repetition will automatically stop if other modes are subsequently
selected.
For the light sources and six modes of lamp modes, please refer to the following
graphics.
(B-1) Manual switching mode to light one lamp
(B-2) Manual switching mode to light two lamps
(B-3) Manual mode to light lamps progressively
(B-4) Automatic repetition mode to light one lamp
(B-5) Automatic repetition mode to light two lamps
(B-6) No lamp light
(C) Scene Mode
: Press and hold the
button to switch among the six scene modes and
then use the
,
,
and
buttons to make a selection.
(C-1) : Automatic mode (default)
(C-2)
: Camera mode. LED will turn off automatically in this mode. If another lamp mode
is selected, the system will set Camera mode as default.
The following four modes can be selected according to brightness of the observed
article to achieve optimal result.
(C-3)
: White mode. For shiny, reflective materials.
(C-4)
: Grey mode. For light colored materials.
(C-5)
: Dark Grey mode. For darkly colored materials
(C-6)
: Black mode. For dark black materials.